BACK TO:About Linkjoin

CIM-3110RMT Magnet Analyzer
CIM-3110RMTMagnet Analyzer is a surface magnetic field measurement instrument for radially magnetized multi-pole permanent magnets. It can measure the peak value, angle, area, width and FWHM of every pole, and automatically judge the number of poles of the magnet ring and polarity of it; statistic analysis of test results and calculate the maximum, minimum, average and standard deviation of every parameter; it can draw the X-Y curve and polar coordinates curve.



Range Min Resolution Accuracy
1KGs, 2KGs,4KGs,8KGs 0.01Gs Superior to 0.5%

Hall Probe

Type Chip sensitive area Temperature coefficient
transverse 2.9mm*1.5mm 0.06%/℃

Software functions

1. The software can run on Windows 7, confirm to Windows software standards, and the operation is simple and intuitive.
2. There is FFT arithmetic built-in the software; harmonic analysis of test waveform can be conducted; it can display and print the waveform spectrum analysis report and output the amplitude data of every harmonic component.
3. The software automatically judge the pole number of magnet ring and polarity of pole.
4. The test results contain the peak value, angle, area, width and FWHM of every pole, absolute and relative angle display can be selected by user.
5. The test results contain maximum, minimum, average and standard deviation of every parameter.
6. X-Y coordinate curve can be zoom freely, and can dynamically trace and display the coordinate of every point on the curve.
7. Support all types of ink-jek or laser printer, user symbol and company name can be added to the test report.
8. There are Chinese and English test reports, it can analog display and can convenient to adjust size and margin.
9. The test report can be convent to images, so as to convenient to inset picture in the thesis.
10. Send colorful test report by email, which is much more clear and fast than fax.
11. With function of database, user can output the test results to EXCEL, which is convenient to analyze it.
12. Double click on the X-Y coordinate can callout the function of single point capture of test results, the relative angle and magnetic field value of the selected point will be displayed on the bottom of the software.

Software interface:

Measurement curves:


Input power AC 200~240V  50/60Hz  10A
Dimension 452mmx302mmx645mm (L * W * H)
Net weight 23.5kg
Total power About 500W
System control PC+6616PX 16 bits data acquisition card
X Axis stroke 125mm,manual adjust
Y Axis stroke 25mm, manual adjust
Z Axis stroke 200mm, manual adjust
W Rotation axis Angle resolution 0.01degree, rotation concentricity≤0.05mm
Test time It can be adjusted, the fast test time is 16 sec/cycle
Measurement range When measuring the outside surface of cylinder workpiece:
outer diameter: Φ3mm~Φ90mm, height≤75mm
When measuring the internal surface of cylinder workpiece:
outer diameter: Φ10mm~Φ79mm, height≤75mm
Range 1KGs, 2KGs, 4KGs, 8KGs
Accuracy Superior to 0.5%
Minimum measured area Transverse probe: 2.9mm*1.5mm
Temperature coefficient 0.06%/℃
 Measured parameters Measure the real time surface magnetic field wave of multi-pole permanent magnets; maximum value, minimum value and average value of surface magnetic field; the peak value, angle, area, width, FWHM of every pole; spectral analysis of wave.
A/D Data acquisition 16Bits,rotation resolution>12000 points/360 º
Repeatability of test results Less than 0.5%
Software Windows 7 operating environment, the test results can be saved on hard disk by EXCEL, and can be checked at any time.
Measurement report X-Y coordinate, polar coordinate and three-dimensional coordinate
Qualification judgment With function of polarity distribution, polar area and calculation of peak value, and judge them according to standards.


Serial No. Name Model Quality Unit Remarks
1 Magnet Analyzer CIM-3110RMT 1 Set  
2 Data acquisition card PC6116 1 piece Installed in the computer
3 Software SMTest 1 Set  
4 Computer Advantech
1 Set With 18.5 inch monitor
5 Printe HP1108 1 Set  

As the products of our company are in constant updates, the change of products without pre-notice.