BACK TO:About Linkjoin

MATS-3100SA Hysteresisgraph
MATS-3100SA Hysteresisgraph can automatically measure the AC magnetic parameters of Fe-Si-Al, Fe-Al, soft ferrite, permalloy, amorphous/nanocrystalline and silicon steel under the frequency of 1kHz~300kHz (continuous frequency), the measured parameters are: Ps, Bm, Hm, Ss, μa, δ, Br and Hc, and can calculate μ′, μ″, μL, μR, Q and AL under certain conditions.
 
The test system is composed of industry computer, TPS series broadband program control power supply and LZ series power analyzer. It is equipped with MATS magnet automatic magnetic test system V7.0 -- SMTest soft magnetic dynamic measurement software, which can realize a variety of complex magnetic characteristics testing and data management.


 

Test Items

1. Double winding measurement
► Shape of test sample  
Excitation (N1) and induction (N2) coils are directly wound on the sample to measure ring, rectangular, EE and EI closed circuit samples.
► Category of test samples
Can test soft magnets such as Fe-Si-Al, Fe-Al, amorphous/nanocrystalline, silicon steel, permalloy, and soft ferrite.
►Test parameters
The measured parameters are: μa, δ, Ps, Br and Hc, and can calculate μ′, μ″, μL, μR, Q and AL under certain conditions.
2. Single winding measurement
The device supports single winding measurement and can directly measure magnetic devices such as single winding photovoltaic energy storage inductance and ring inductance. At this time, the power consumption Pe includes the line loss of the winding coil.

 
 

 Features                                             

►Adopt digital power supply and standard power meter which are controlled by computer and the whole measure process can be finished automatically.
► Digital programmable power supply has the function of change ranges automatically, and can automatically match the output range and sampling range according to the material characteristics, effectively improve the safety of equipment and measurement accuracy.
► Test samples with closed magnetic circuit and can be directly winded and measured on sample. The sample, magnetizing coil (N1) and measuring coil (N2) together to form the no-load transformer.
► Magnetizing coil circuit serial with the current of standard power meter, and get the magnetic field peak by reading the current peak value of power meter.
► Connect the measure coil to the voltage input port of standard power meter, calculate the peak value of magnetic flux density by reading the voltage effective value of the power meter.


 
 

Technical Data

Working Environment
Parameters Specifications
Input Power Single-phase 220V, 50Hz
Environment Temperature: 23±5℃; Humidity: 30~75%RH
External magnetic field interference Absolutely avoid
Thermal balance time 10 minutes
TPS-XXXX Broadband Program Control Power Supply
Model TPS-500A TPS-600A
Sub-model 1207B 2007B 3007B 1210B 2010B 3010B
Max. Output power 500VA (≤120k) 600VA (≤120k)
Frequency 1kHz~120kHz 1kHz~200kHz 1kHz~300kHz 1kHz~120kHz 1kHz~200kHz 1kHz~300kHz
Frequency fineness < 0.1%×current value,  frequency error< 0.05%
Output voltage 0~10V~75V~150V~300V, four automatic ranges 0~10V~30V~60V~120V, four automatic ranges
Max. Output current 7A 7A 7A 10A 10A 10A
Fixed Bm √ √ √ √ √ √
Fixed Hm ◎ √ √ √ √ √
TPS-1000A/1010B Broadband Program Control Power Supply
Parameters Specifications
Max. Output power 1000VA (≤50k) sine wave
Frequency 10k～100kHz
Frequency fineness < 0.1%×current value,  frequency error< 0.05%
Output voltage 0～300V four automatic ranges
Max. Output current 10A
Fixed Bm √
Fixed Hm √
1.√ means support this function  ◎ means the optional function  
2. Model definition: max output power (VA), suffix means max frequency(kHz)/10+max output current (A)+letter (A: support fixed B; B: supports fixed B and fixed H)
LZ-300 Power Analyzer
Model LZ-300/3008 LZ-300/3012
Frequency measurement 1kHz~300kHz
Current measurement 0~8A (effective value) 0~12A (effective value)
Voltage measurement 0~300V (effective value) 0~120V (effective value)
Phase accuracy 1% ±0.05° 1% ±0.05°
Model definition: max frequency (kHz)/10+ max current (A), add 0 in the front when the max current is less than 10.  


 

 SMTest Test Software                                    

► Running environment: Windows operating system.
► System language: Chinese or English.
► Multiply units can be selected to meet the use habits of different customers.
► Support input sample parameters with shapes of ring, EE, EI, CD, rectangle, diplopore, BS and others.
► Calculate Ae and Le according to sample sizes.
► Multiple groups of measurement conditions can be set at a time, such as fixed frequency, fixed Bm and fixed Hm can be set at the same time. Multi-condition test can be completed with one click.
► Can set 1 to 100 test points for each group at a time, quick setting in batches is supported.
► Save the text conditions to “Saved test conditions”, there is no need to duplicate input test conditions.
► The file system adopts database format and can output test results to Excel tables
► Test data is automatically saved, supporting historical data query, import and delete.